Posts Tagged ‘mark wallace’

Video 4: Advanced Metering

October 6, 2010

Mark Wallace is back with the fourth and final Adorama video of a four-part series on metering. This installment focuses on using the Sekonic L-758DR, with Wallace demonstrating some advanced concepts of incident and reflective metering. He mounts his meter on a stand and positions it where he wants to check his strobes—a trick he often uses in the studio. He also explains how to use the meter with the zone system, and includes still images fully documenting different exposure settings.

Thanks for a great series and all the knowledge, Mark!

Don’t forget to check out Part 1Part 2 and Part 3 of this four part series.

After you’re done learning from one of the masters of metering, check out all the Sekonic meters to step up your game and nail your exposures in-camera, saving you countless hours trying to tweak them in Photoshop or Lightroom.

Video 3: Using a Light Meter

September 29, 2010

Mark Wallace is back with the third Adorama video of a four-part series on metering. This installment focuses on how to use a light meter. He breaks down the key elements of the “exposure triangle,” which are aperature value, shutter speed, and ISO. By entering any of two of the values into your light meter, the meter will produce the missing variable, enabling you to dial in the correct exposure on your camera.

Wallace demonstrates the Sekonic L-358 meter throughout, and explores the four different modes available on the meter: ambient mode, cordless flash mode, cord flash mode, and wireless flash radio triggering mode. He goes into detail on two modes, basic ambient metering and wireless triggering.

For ambient metering, he provides both outdoor location and indoor studio examples, along with many handy tips, such as a multitude of issues when positioning your meter in front of a model, and settings galore. Thanks for both the overview and the details, Mark!

Don’t forget to check out Part 1 and Part 2 of this four part series.

After you’re done learning from one of the masters of metering, check out all the Sekonic meters to step up your game and nail your exposures in-camera, saving you countless hours trying to tweak them in Photoshop or Lightroom.

Video 2: Exposure Compensation

September 15, 2010

Mark Wallace returns in this second Adorama video of a four-part series on metering. This installment focuses on exposure compensation. Watch Wallace demonstrate how cameras expose for 18% gray, whether shooting a solid black or solid white wall. He teaches us how to set exposure compensation to underexpose by two stops, making a black wall black. Conversely, he moves in the opposite direction by two stops to have a white wall correctly register as white.

Moving to practical applications of exposure compensation, he photographs a model wearing black against a black background, and white top against a white background.

In a great practical demonstration, Wallace also shows what’s going on via the LCD panel on the back of your camera while employing exposure compensation. Thanks for the demystification, Mark!

As a precursor, don’t forget to check out Part 1 of this four part series.

After you’re done learning from one of the masters of metering, check out all the Sekonic meters to step up your game and nail your exposures in-camera, saving you countless hours trying to tweak them in Photoshop or Lightroom.

Video 1: Understanding TTL

September 8, 2010

The unstoppable Mark Wallace is at it again! You can now see him in a series of four videos on light metering. He starts off the series detailing how your camera meters light in an attempt to get the correct exposure. TTL (through the lens) reflective metering and specific metering modes such as spot metering, partial metering, average metering, center weighted average metering, and matrix metering are covered.

Watch this space for upcoming breakdowns of the other videos in this informative series. As the series progresses, Wallace demonstrates how to rock like a pro with a light meter.

After you’re done learning from one of the masters of metering, check out all the Sekonic meters to step up your game and nail your exposures in-camera, saving you countless hours trying to tweak them in Photoshop or Lightroom.

VIDEO: Live from Imaging USA

January 15, 2009

Well…. not so live, but Mark Wallace just posted videos from the show floor. Jump to 2:54 to see Sekonic

Mark and Phil talk about the best light meter for the beginning studio photographer plus radio triggering frequencies in the USA and Europe, and how to identify what you need.

We’re confused. Is 3:1 three times weaker or three times stronger? (our Martinis, of course.)

September 11, 2008

Mark Wallace, a master of making complicated things look and sound simple, has delivered yet another of his brilliant how-to-videos. Yes, you guessed it. It’s all about lighting ratios. You’ll understand why it’s so important, how to control it and what results you can expect.

You can also see this video on his blog or in HD on Vimeo. How cool is that? As readers know, we’ve featured Mark twice before (here and here), from his “Digital Photography One on One” series.  So, set up the your lights, get out the Sekonic, and follow Mark’s sage advice. We’re just kidding about the Martini. You have to stay alert in class.

Using Sekonic Meters to Balance Flash and Ambient II – Digital Photography 1 on 1 with Mark Wallace

August 16, 2008

Mark Wallace of SnapFactory made a GREAT video about balancing ambient and flash with the Sekonic L-758DR – very instructional, very detailed. Learn and enjoy. Thanks, Mark! Be sure to browse his blog – it’s chock full of video goodness. He runs a knockout workshop series, too.

Also can be viewed on StudioLighting.net, makers of the (awesome) LightSource podcast, and Vimeo